The JPC S550 powerglide package is the easiest and quickest way to get powerglide in your S550 chassis. This package is setup to work with any modular or coyote based engine. Here at JPC we try to take the guess work out of transmission swaps by offering complete swap packages. These packages come with FREE SHIPPING!
This package includes -
- Transmission Specialties Proline 5000 Powerglide
- Modular Bell Housing
- Hurst Shifter
- Custom Torque Converter (can be spec'd to your application)
- Custom DSS 4" Driveshaft w/ Strange Billet Pinion and Trans Yoke
- Flexplate
- B &M Trans Cooler w/ Fan and 23ft of -6an hose. Fittings also Includes
- JPC Custom Powerglide Transmission Crossmember and Mount
- Flexible Braided Dipstick
- ARP Flexplate bolts
- ARP Converter Bolts
- Prolite Transbrake
- NASA Input Shaft
- New Clutch Hub
- New Servo
- 8 Clutch Pack
- New 4340 Output Shaft
- 9310 1.80 Gears
- New 1.80 Ring Gear
- New Pins
- New Thrust Washers
- Deep Aluminum Pan
- High Flow PG Pump
- High Performance Gasket and Seals
- SFI Approved Aftermarket Case
- SFI Approved Aftermarket Tail Housing
Some hardware may be required. Some massaging of the transmission tunnel is necessary for install. Converter will need to be shimmed at least .150" out of the pump, have a professional install if your unsure how to shim the converter. Allow for 3-5 week ship time on these orders as the driveshafts are made on a custom basis.
Optional:
AEM Electronics X-Series temperature gauges are must-haves for highly accurate transmission temperature readouts in your high performance vehicle. X-Series digital gauges include new technological features that make them easier to use. They combine exceptional looks with increased visibility and a multitude of innovative and easy-to-use features for gauges like no other!
Features of AEM X-Series temperature gauges include:
- Auto-dimming sensor delivers ideal display brightness
- Programmable center LED is 87 percent larger than original AEM gauges
- User-selectable standard or metric display (100 to 300 F/40 to 150 C)
- User-selectable threshold warnings
- Peak/recall via gauge face buttons
- AEMnet CANbus-enabled for transmitting data to EMS or data logger
- 0-5 V analog outputs for transmitting data to EMS or data logger
- 33 percent larger gauge face display makes it easier to see at a glance.
- Standard 2 1/16 in. (52mm) diameter housings for easy mounting in gauge pods
- Slim 0.825 in. overall depth and 0.200 in. cup depth--mount them virtually anywhere
- Positive locking connectors provide secure connection
***Free shipping only for commercial addresses***
*** 2-3 Week Build Time Approximately ***
