FIC- 650cc Injector Set for Mustang GT ('86-'17) (High-Z) Mustang GT '86-'15 Fuel Injector Clinic Injector Set: 8 x 650 cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Drop-in for size... MSRP: Was: Now: $683.00 Choose Options
FIC- 775cc Injector Set for Mustang GT ('86-'17) (High-Z) Mustang GT '86-'15 Fuel Injector Clinic Injector Set: 8 x 775 cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Drop-in for size... MSRP: Was: Now: $720.00 Choose Options
NanoPro The 3-in-1 NanoPRO is an O2 Conditioner, Dash Display, and Switch Panel in one! O2 Sensor: The NanoPRO is compatible with 5 different wideband O2 sensors (Bosch 4.2, Bosch 4.9, Bosch 5.2, NTK ZFAS-U2 “laboratory,” and NTK ZFAS-A2). The... MSRP: Was: Now: $389.00 Add to Cart
AFIS Injector - 800 LB/HR DETAILS Versatile design supports Methanol, Ethanol, Gas and CNG applications One piece construction offers OEM quality and reliability without any gimmicks No internal O-Rings Standard body (1.85" Long), EV1 Connector, Low Impedance... MSRP: Was: Now: $375.00 Add to Cart
AFIS Injector - 600 LB/HR DETAILS Versatile design supports Methanol, Ethanol, Gas and CNG applications One piece construction offers OEM quality and reliability without any gimmicks No internal O-Rings Standard body (1.85" Long), EV1 Connector, Low Impedance... MSRP: Was: Now: $325.00 Add to Cart
AFIS Injector - 400 LB/HR DETAILS Versatile design supports Methanol, Ethanol, Gas and CNG applications One piece construction offers OEM quality and reliability without any gimmicks No internal O-Rings Standard body (1.85" Long), EV1 Connector, Low Impedance... MSRP: Was: Now: $300.00 Add to Cart
AFIS Injector - 250 LB/HR DETAILS Versatile design supports Methanol, Ethanol, Gas and CNG applications One piece construction offers OEM quality and reliability without any gimmicks No internal O-Rings Standard body (1.85" Long), EV1 Connector, Low Impedance... MSRP: Was: Now: $188.00 Add to Cart
MSD - Spark Plug Wires (Coyote with Smart Coil) Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the... MSRP: Was: Now: $282.95 Add to Cart
Fueltech- FT Injector 820lb/h FEATURES REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders It has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw... MSRP: Was: Now: $399.00 Add to Cart
Fueltech- PEAK & HOLD PRO INJECTOR DRIVER FEATURES Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or... MSRP: Was: Now: $439.00 Add to Cart
Fueltech- PEAK & HOLD 8A/2A DRIVER FEATURES Current control driver for low impedance injectors 4 channels Available in three current versions:8A/2A 4A/1A2A/0.5A TECHNICAL DESCRIPTION Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5... MSRP: Was: Now: $254.00 Add to Cart
FuelTech- CDI RACING IGNITION COIL (Ea.) The FuelTech CDI Racing Ignition Coil is made to be used with our FuelTech FTSPARK ignition module with individual coil per cylinder and also rotary applications This coil is made for Capacitive Discharge Ignition only and can not be used... MSRP: Was: Now: $59.05 Add to Cart
Fueltech - BACKPRESSURE DAMPENING CANISTER By separating the back-pressure sensor from direct connection to the exhaust manifold using the FuelTech Backpressure Canister, the sensor will be protected from heat, moisture and also has pressure spike filtering naturally built into the canister... MSRP: Was: Now: $199.00 Add to Cart
Fueltech - Pro Injector Driver (Peak and Hold) FEATURES Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or... MSRP: Was: Now: $439.00 Add to Cart
Haltech - WB2 - Dual Channel CAN O2 Wideband Controller Kit WB2 - Dual Channel CAN O2 Wideband Controller Kit MSRP: Was: Now: $519.00 Add to Cart
MagnaFuel- Pro Outlaw 525 Series Belt Driven Pump (5 GPM), Black Outlaw Series Belt drive with industry standard coupling for instant swap to high performance. Tighter tolerances for easy priming, quick and reliable starts Flow rates up to 10.5 gpm at 100psi for engines with high-volume fuel... MSRP: Was: Now: $529.99 Add to Cart
Fueltech - FT Injector 320 Pound Per Hour Racing Injector (Ea.) The FT Injector is available in three versions 320 lb/H (~3272 cc/min) 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to... MSRP: Was: Now: $322.05 Add to Cart
Holley - 160 GPH DOMINATOR IN-LINE BILLET FUEL PUMP Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holley's Dominator™ in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising... MSRP: Was: Now: $569.95 Add to Cart
Holley - 200 GPH DOMINATOR IN-LINE BILLET FUEL PUMP Carb or EFI Applications Supports up to 1800 EFI or 2100 Carb HP Compatible with Pump Gas*, Race Gas, Diesel or E85 Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holley's... MSRP: Was: Now: $620.95 Add to Cart
Fueltech - FT Injector 720 Pound Per Hour Racing Injector (Ea.) The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to 130psi base fuel pressure... MSRP: Was: Now: $379.00 Add to Cart
Fueltech - FT Injector 520 Pound Per Hour Racing Injector The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to 130psi base fuel pressure... MSRP: Was: Now: $339.00 Add to Cart
Billet Atomizer - 800 Pound Per Hour Racing Injector Price Per Injector Billet Atomizer Atomizer 3 Fuel Injectors Billet Atomizer offers Atomizer 3 fuel injectors—your race-winning ticket when it comes to fuel system components! Available in a wide range of flow rates, pressure... MSRP: Was: Now: $398.00 Add to Cart
Billet Atomizer - 750 Pound Per Hour Racing Injector Price Per Injector Billet Atomizer Atomizer 3 Fuel Injectors Billet Atomizer offers Atomizer 3 fuel injectors—your race-winning ticket when it comes to fuel system components! Available in a wide range of flow rates, pressure... MSRP: Was: Now: $398.00 Add to Cart
