EFI Standalone Systems

NanoPro

The 3-in-1 NanoPRO is an O2 Conditioner, Dash Display, and Switch Panel in one! O2 Sensor: The NanoPRO is compatible with 5 different wideband O2 sensors (Bosch 4.2, Bosch 4.9, Bosch 5.2, NTK ZFAS-U2 “laboratory,” and NTK ZFAS-A2). The...

Fueltech- FT Injector 820lb/h

FEATURES   REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders It has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw...

Fueltech- PEAK & HOLD PRO HARNESS

Fueltech- PEAK & HOLD PRO INJECTOR DRIVER

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or...

Fueltech- PEAK & HOLD 8A/2A DRIVER

FEATURES   Current control driver for low impedance injectors 4 channels Available in three current versions:8A/2A 4A/1A2A/0.5A TECHNICAL DESCRIPTION   Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5...

FuelTech- CDI RACING IGNITION COIL (Ea.)

The FuelTech CDI Racing Ignition Coil is made to be used with our FuelTech FTSPARK ignition module with individual coil per cylinder and also rotary applications This coil is made for Capacitive Discharge Ignition only and can not be used...

Fueltech - BACKPRESSURE DAMPENING CANISTER

By separating the back-pressure sensor from direct connection to the exhaust manifold using the FuelTech Backpressure Canister, the sensor will be protected from heat, moisture and also has pressure spike filtering naturally built into the canister...

Fueltech - Pro Injector Driver (Peak and Hold)

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or...

Haltech - WB2 - Dual Channel CAN O2 Wideband Controller Kit

WB2 - Dual Channel CAN O2 Wideband Controller Kit

Fueltech - FT Injector 320 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in three versions 320 lb/H (~3272 cc/min) 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to...

Fueltech - FT Injector 720 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to 130psi base fuel pressure...

Fueltech - FT Injector 520 Pound Per Hour Racing Injector

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to 130psi base fuel pressure...

Fueltech - Smartcoil Harness Pro 550 / FT600 FORD V8

The FuelTech PRO550/600 Smart Coil harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expansion harness the user can make the change to multi smart coils with ease! The harness is fitted with a 16 way...

Fueltech - Smartcoil (Each)

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, With up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics as well as the power to needed...

Fueltech - Wideband Nano WB-o2

Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors.

Fueltech - PEAK & HOLD 8A/2A DRIVER w/ Harness

Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5 ohm 16 Bosch 160lb/h (1600cc) injectors (4 per channel) 8 Siemens low impedance injectors (2 per channel) 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance...

Racepak- Turbo Speed Sensor For V-Net Dataloggers

This speed sensor allows users to monitor turbo speed to determine the efficiency of their turbocharging system.

Racepak- Transmission Temp Sensor 0-300F for V-Net Dataloggers

This V-Net module allows you to measure transmission temperature, 0-300°F. Comes with a 72” lead.

Racepak- Trans Temp Sensor for V-Net Datalogger

Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical information about your transmission and...

Racepak- Head Temperature Sensor For V-Net Dataloggers

This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. Please specify left or right when ordering.

Racepak- Manifold Temp Sensor For V-Net Dataloggers

This V-Net module allows you to measure manifold temperature using a resistive-type sensor, 0-300°F. Comes with a 72” lead.

Racepak- Oil Pressure Sensor For V-Net Data Loggers

Data Acquisition, Racepak, V-Net Module with Sensor, Oil Pressure, 0-150 PSI   Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is...

Racepak- Oil Temperature Sensor For V-Net Data Loggers

Data Acquisition, Racepak, V-Net Module with Sensor, Oil Temperature, 0-300 degrees F   Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net...

Racepak- Non-Contact Infra-Red Temperature Sensor

Data Acquisition, Racepak, Temperature Sensor, Non-Contact Infra-Red, 0-300 Degrees F   Racepak non-contact infra-red temperature sensors are designed specifically for the motorsports market. These compact but rugged sensors are capable of...